Model´╝Ü USC-15B




 

Active Speaker System
USC-15B/USC-18BS
 
      USC15B and USC-18BS are a complete sound reinforcement solutions consisting of two two-way speakers and an active sub woofer. The subwoofer enclosure is equipped with a three channel amplifier and all the electronic required to run the system. The electronic circuitry was fine tuned to match the two-way speakers for the best possible sound. These two systems are designed for easy operation since you do not need to worry about tweaking frequencies, all you have to do is set up the system components, connect the XLR right and left signal cables, speaker cables and power cords and then you are ready to go.
1.   The front chamber serves as the cabinet for the subwoofer
2.   The rear chamber in the subwoofer features multi function controlling panel for input and output connection, gain control, balanced and unbalanced out, cooling fans, fuse holder and so on
3.   Two satellites can be supported with connecting stands and each of the speaker has the power handling capacity more than 80 W
4.   Set the subwoofer on its casters and placed the two satellites onto the subwoofer’s front panel facing down for transportation. Secure locking strap and dust cover are also included for protection
 
Specifications:
 
 
USC-15B
USC-18BS
CHA/CHB(4ohm EIA 1Khz 1.0%THD)
80W
100W
S BASS(4ohm EIA 1Khz 1.0%THD)
300W
400W
Input level
0.5V
S/N
>100dB
Frequency Response
20hz-20Khz +0/-1dB
Input impedance
44K ohm Balanced 22K ohm Unbalanced
Distortion(SMPTE-IM)
0.1%
connecting(each channel)
Input XLR, Output XLR
Control(Front panel)
Gain Knobs, Pan Knobs, Main Knobs, Sub Knobs, Power switch
Gain
32dB
Protection Circuitry
Short circuit, Output offset, power on/off muting
Power requirement(Depends on region)
100-120VAC,220-240VAC 50/60HZ
Speaker(Tweeter)
1"
1.34"
Speaker(Woofer)
2×8"
2×12"
SUB woofer speaker
15"
18"